Discover all screw thread types with clear charts UNC Metric NPT Acme plus free guides and vast part numbers for fast US shipping and easy selection.

One stripped screw can cost you hours—if not thousands—in downtime. That’s why knowing your thread types screw inside and out isn’t optional; it’s mandatory. Whether you’re swapping out a stripped bolt, designing a new machine, or sorting through a mixed box of hardware, understanding thread forms—from UNC and metric to NPT pipe threads—saves time, money, and headaches. This guide cuts through the noise with clear, actionable info and instant ID tools so you never second-guess that fastener again. Ready to master every thread and pick the perfect fit fast? Let’s get started.

Screw Thread Anatomy in 60 Seconds: 8 Must-Know Terms

Let’s break down the screw thread basics fast—know these 8 terms like a pro.

• Major Diameter (∅): The largest diameter of the external thread. Think of it as the screw’s widest point.
• Pitch: Distance between adjacent threads, measured parallel to the screw axis. It dictates how fine or coarse the thread is.
• TPI (Threads Per Inch): Number of threads in one inch length. It’s the standard for inch-based screws and helps quickly ID thread fineness.
• Crest: The top surface of the thread ridge—the “peak” you feel when running your finger along a screw thread.
• Root: The bottom between threads—the valley that separates one thread from another.
• Flank Angle: The angle between the thread flanks. This angle influences strength and how well threads mate.
• Lead: How far the screw advances axially in one full turn. For single-start screws, lead equals pitch; multi-start screws have multiple threads and larger leads.
• Handedness: Either right-hand (standard, tighten clockwise) or left-hand (reverse). Know which way your screw turns before you start!

Master these terms and you’re ready to identify, measure, and select screws like a seasoned shop-floor expert.

The 6 Thread Families You Meet Every Day

When it comes to screw thread types, you’re mostly dealing with six main thread families. Here’s a quick rundown so you can spot them on the job:

Unified Inch Threads (UTS)

• cURL Too many subrequests. Great for strength and quick assembly. You’ll find these in automotive and construction.
• cURL Too many subrequests. Smaller pitch makes these vibration-proof—ideal for machinery that shakes a lot.
• UNEF/UNJF: Aerospace-grade threads with super-tight tolerances for reliability at high stress.
• Class 1A/2A/3A: These refer to fit or tolerance—1A is loose, 3A is tight. Most DIY and general work use 2A, which balances ease and strength.
• vast™ UNC Kits: Cover popular sizes from #4-40 to 1″-8, made with durable 18-8 stainless steel, perfect for everyday repairs and maintenance.

ISO Metric Threads

• M Coarse vs M Fine: Coarse threads are common and robust; fine threads give you better grip in precision applications.
• Property Classes 8.8 / 10.9 / 12.9: These numbers tell you the strength of the bolt, with 12.9 being the toughest.
• US-to-Metric Swap Table: Handy if you often switch between American and metric parts—keeps replacements simple.
• vast™ A2-70 Metric Bins: cURL Too many subrequests.

cURL Too many subrequests.

• cURL Too many subrequests. cURL Too many subrequests.
• cURL Too many subrequests. cURL Too many subrequests.
• cURL Too many subrequests. cURL Too many subrequests.

cURL Too many subrequests.

• cURL Too many subrequests. cURL Too many subrequests.
• cURL Too many subrequests. cURL Too many subrequests.
• cURL Too many subrequests. cURL Too many subrequests.

cURL Too many subrequests.

• cURL Too many subrequests. cURL Too many subrequests.
• cURL Too many subrequests. Specialized shapes that boost grip and reduce torque needed for insertion.
• Sheet-Metal vs Plastic Rules: Different materials require different thread profiles to avoid stripping or cracking.

Legacy & Specialty Threads

• Whitworth and BSF (British Standard Fine): Old British standards still found on vintage equipment.
• BA (British Association): Tiny threads mostly for electronics and instruments.
• Knuckle Threads: Rounded profiles for easy hand-tightening, like on bottles or lamps.
• Trapezoidal Threads: Metric equivalent of ACME, used in heavy-duty power transmission.

Understanding these thread families helps you pick the right screw every time—no more guessing or misfits. Plus, with vast™ kits tailored to key thread types, you’re always prepared for any project in the US market.

Instant Screw Thread Identification Flowchart

Stuck figuring out what thread type you’ve got? Our interactive flowchart breaks it down step-by-step, no confusion.

• Pointy or blunt? Start by checking the thread tip shape. Pointy usually means metric or unified threads; blunt often signals pipe or specialty threads.
• Inch or metric? Next, measure the pitch or threads per inch (TPI). Worried about converting? We’ve got quick TPI to mm guides built in.
• Tapered or straight? This tells you if it’s a pipe thread like NPT (tapered for seal) or a straight thread like BSPP.

Follow the flow, and you’ll land on the exact vast™ SKU you need — no second-guessing. This tool’s perfect for US mechanics, fabricators, and hobbyists who want fast, reliable thread ID on the job.

Save time, get it right, and stock up with confidence.

Thread Selection Cheat Sheet

Picking the right thread type is easier when you know what materials and loads you’re dealing with. Here’s a quick guide to help you select the perfect screw thread for your project:

Load Calculator Widget

Use a load calculator to match thread size and pitch with the mechanical load you expect. This helps prevent failures like stripping or breakage, especially in high-stress applications.

Material MatchStainless Steel (SS): Great for corrosion resistance and moderate strength. Ideal for plumbing and outdoor use.
Grade 8 Steel: High strength and hardness, perfect for heavy machinery and automotive parts. Avoid corrosion without proper coating.
Brass: Excellent for electrical fittings and low-strength applications where corrosion resistance and conductivity matter.Galling Fixes for Titanium & Inconel

Titanium and Inconel are popular in aerospace and medical fields but can gall (stick) under load. Prevent galling by:

• Using lubricants or anti-seize compounds
• Selecting slightly larger thread clearances
• Opting for thread designs that reduce surface friction

With these quick tips, you can confidently pick the right screw thread type, keeping your build secure and durable. For a deeper dive into fit classes and thread specs, check out UNC vs UNF differences and metric coarse pitch tables.

Free Downloads: Your Thread Tools on the Go

To make your screw thread work easier, we offer some handy freebies tailored for U.S. users:

• 11×17 PDF Wall Chart: Keep this clear, easy-to-read thread types screw chart right in your workshop or toolbox. It covers major thread families, pitch sizes, and quick ID tips at a glance.
• cURL Too many subrequests. cURL Too many subrequests.
• cURL Too many subrequests. cURL Too many subrequests.

cURL Too many subrequests.

cURL Too many subrequests.

cURL Too many subrequests.

cURL Too many subrequests.

• cURL Too many subrequests. cURL Too many subrequests.
• cURL Too many subrequests. cURL Too many subrequests.
• cURL Too many subrequests. cURL Too many subrequests.

cURL Too many subrequests.

• cURL Too many subrequests. cURL Too many subrequests. cURL Too many subrequests.
• cURL Too many subrequests.
• cURL Too many subrequests.
• cURL Too many subrequests.

Real-World Case

A big manufacturer prevented a $2 million recall by spotting early signs of thread galling in stainless steel screws. They switched to coated fasteners and updated their assembly process — no more downtime or costly fixes.

Knowing these common screw thread failures and fixes is a game changer for anyone working in machining, plumbing, or restoration across the U.S. It keeps projects smooth and avoids expensive mistakes.

vast™ One-Click Thread Kits

Get the right thread types screw fast with vast™ One-Click Thread Kits. We’ve put together 5 curated boxes tailored to your needs:

• Shop Kit: Essential UNC, UNF, and metric screws for everyday repairs and projects.
• Plumbing Kit: Includes NPT and BSP threads with proper sealing options—perfect for leak-free plumbing fixes.
• CNC Kit: Precision Acme, Stub Acme, and metric fine threads for smooth machine builds and repairs.
• Aviation Kit: Aerospace-grade UNEF and UNJF threads designed for high-stress, safety-critical applications.
• Restoration Kit: Classic Whitworth, BA, and specialty screws to bring vintage gear back to life.

Each box offers easy access to common thread pitch sizes, materials like 18-8 SS and A2-70, plus clear labeling that fits U.S. usage habits. No more hunting—just one click and your threads are sorted.

FAQ: Your Top 12 Thread Types Screw Questions Answered

Here are the 12 most common questions we get about screw thread types, all broken down simply to help you find the right fit fast.

1. What’s the difference between UNC and UNF threads?

• UNC (coarse) is stronger and faster to install; UNF (fine) offers better vibration resistance.

2. How do I identify thread pitch and TPI (Threads Per Inch)?

• Use a thread pitch gauge or compare to a chart. Pitch is the distance between threads; TPI is how many threads fit in an inch.

3. Can I use metric threads instead of inch?

• Often yes, but check the load and fit requirements. Use a US-to-metric swap table for quick conversions.

4. What’s the deal with pipe threads like NPT vs BSP?

• NPT threads seal with a taper and tape; BSP is straight and often leaks if mixed with US parts.

5. What thread class should I pick? 1A, 2A, or 3A?

• 1A for loose fit, 2A is standard, 3A for tight, precision assemblies.

6. How do I stop galling on stainless or titanium screws?

• Use lubrication, proper thread classes, or switch to coated or dissimilar materials.

7. What’s the advantage of power-transmission threads like Acme or Buttress?

• They handle high loads and specialized movements—Acme for leadscrews, Buttress for one-direction stress.

8. How fast should I torque pipe threads?

• Follow torque charts and always use Teflon tape or sealant to prevent leaks.

9. Are self-tapping screws universal?

• No, Type A/B/AB suit different materials; pick according to sheet metal, plastic, or softer metals.

10. What causes cross-threading and how do I avoid it?

• Misaligning screws or forcing threads. Start screws by hand and keep threading straight.

11. Can I replace legacy threads like Whitworth with modern types?

• Not always. Whitworth and BA are still used in restoration or specific industries—special tools needed.

cURL Too many subrequests.

• cURL Too many subrequests.

cURL Too many subrequests.